This innovative analog input module 140ARI03010C offers a robust and reliable solution for all analog requirements. The model features a dual light array of 1 green and one red LED: the former indicating bus communication presence and the latter displaying any potential external faults. Additionally, an eight-green/eight-red system is in place to show active channels with their associated channel issues respectively.

This model 140ARI03010C boasts a low power consumption of merely 1 watt while also adhering to the standard module format. This device uses an accurate temperature probe to produce up to 2.5 mA currents for analog inputs.

The 140ARI03010C model provides reliable channel isolation through 300 Vrms AC while offering an update time of 1200 ms for 3-wire applications. In addition to 9 input words addressing requirements, this powerhouse offers 13 bits resolution on its analog inputs.

This Analog RTD Input 8 Channel module offers precise temperature monitoring capabilities, capable of processing signals from up to eight different 2-, 3- and 4-wire sensors. These readings are seamlessly communicated with the Quantum CPU for accurate data interpretation.

The module (140ARI03010C) requires nine 16-bit words, with eight to accommodate data and one to indicate channel status. For optimal wiring configuration of the module, it is advisable to utilize wire sizes ranging from 20 AWG to 1 or 2 -14/16 AWG..

This highly accurate model boasts an absolute accuracy error of 0.1 degrees Celsius and a linearity error within +/-0.01% of full scale while weighing just 0.3 kilograms. It also efficiently draws 200 mA from the bus current for optimum performance.

The 140ARI03010C model's accuracy levels off at a mere 0.5 degree centigrade variance from the expected 25°C, with an impressive protection rating of 1780 V AC for up to one full minute across the 47-63 Hz frequency range.

The 140ARI03010C model must be used within a temperature range of 0 to 60°C and stored at temperatures between -40 and 85°C in an environment with no more than 95% relative humidity. The model can operate at peak efficiency even when placed as high up as 5000 meters of altitude.

This product prioritizes environmental safety, adhering to EU RoHS standards, and being completely mercury-free. Utilizing a designated waste collection site is essential.

For the safety of operators, it is critical to ensure any machinery used has proper point-of-operation guarding. Unprotected equipment can lead to hazardous situations and cause serious harm or injury. Qualified personnel should be the only ones to install, operate, service, and maintain this model. The company is not liable for any adverse outcomes resulting from its use.

A range warning is immediately communicated When a channel input rises beyond the set rated value. If the conditions deteriorate and exceed this parameter by over 2.34%, an out-of-range bit will activate to notify users of potential danger. If a cable in a circuit is damaged or broken, the event will still happen.

Automation is key to efficiently controlling industrial processes. This model 140ARI03010C  offers flexibility in adapting for each application, with factors such as control function, level of protection, and other specifications being taken into account accordingly.

&nbsp