Part Number: IC660BBA025

Product Description: The GE Intelligent Platforms/GE Fanuc Genius I/O IC660BBA025 is a robust analog current source designed to provide six 4 to 20 mA output circuits with a voltage rating of 24/48 VDC. This module does not require calibration for operation and is fully software configurable, featuring advanced diagnostic capabilities and a dedicated control for bus switching modules. Outputs 5 and 6 can also be utilized for voltage applications as necessary. Each output loop independently supports 4 to 20 mA current control, with power supplied directly by the block, eliminating the need for separate power sources for the current signals. Configuring the IC660BBA025 requires a compatible handheld monitor (model IC66*HHM501G, version 4.0 or later) for entering the device and reference numbers. The advanced diagnostics can provide feedback and fault messages that can be cleared directly through the handheld monitor or the CPU. This module features dual 12-bit digital-to-analog converters, enabling precise current control from 0 mA to 24 mA with a resolution of 6 microamps. For optimal performance, the IC660BBA025 should be installed within a protective enclosure in clean environments with minimal airborne contaminants. Note that if configured offline, proper grounding and a 75 Ohm resistor must be connected across the Serial 1 and 2 terminals.