Part Number: IC693MDL653

The GE Fanuc IC693MDL653 is a 24-volt DC Positive/Negative Logic Input Module designed for the Series 90-30 Programmable Logic Controllers. This module features 32 input points arranged into four groups of eight, with two ordinary pins connected internally in each group. The IC693MDL653 is capable of toggling inputs with a response time of up to 2 milliseconds for both “on” and “off” states. It supports both positive and negative logic configurations: in a positive logic system, it sources current from the input device to the negative bus, while in a negative logic setup, it routes current from the input device to the positive power bus.

This module is compatible with a wide range of input devices, including switches, push buttons, and electronic proximity sensors. Users can connect field devices using the IC693MDL653 along with high-density modules featuring a 50-pin Honda connector on the front panel, with prewired cables that have terminal lugs for convenient connections. Notably, the IC693MDL653 does not include LED indicators for displaying circuit conditions. It is designed to be installed in an I/O port within a 5 to 10-slot baseplate of a Series 90-30 PLC system. The module operates with an average input current of 7.5 mA at rated voltage, boasting an on-state voltage minimum of 15 volts DC, an off-state voltage maximum of 6 volts DC, an on-state current minimum of 4.5 mA, and an off-state current maximum of 2 mA. Additionally, the maximum number of inputs that can be activated simultaneously is limited to 16. The rated voltage for this module is 24 volts DC, with an input voltage range of 24 volts DC (+10%, -20%). DC power supply compatibility is also supported.